Managing the Access Point203282-B 5-53. Click the action that you want to perform (Table 5-1).4. Click OK.A confirmation dialog box opens.5. Click Yes to confirm the action.The BayStack AP Manager main window is displayed.Table 5-1. Function of the Actions MenuAction DescriptionReboot Reboots a single access point.Turn Adapter PowerOffTurns off the power to the adapter (PC card) inserted in theaccess point.Commit ConfigurationTo FlashThis option commits all settings to flash, including IP address,subnet mask, WEP settings, etc. to flash.Commit IPConfiguration ToFlashThis option commits only IP address, subnet mask, and Gatewayaddresses settings to flash.Set to FactoryDefaultsResets the access point back to its factory default settings.Upgrade Access PointFirmwareUse this option to flash upgrade the firmware for the access point.Obtain the new firmware from Nortel Networks technical support.Go to Chapter 7, “Diagnostics and Troubleshooting” forinformation on obtaining a flash upgrade.Upgrade AdapterFirmwareUse this option to flash upgrade the firmware for the adapterinserted in the access point. Obtain the new firmware from NortelNetworks technical support. Go to Chapter 7, “Diagnostics andTroubleshooting” for information on obtaining a flash upgrade.
