Page 100 of 504 Attendant consoles553-3001-367 Standard 3.00 August 2005SACP key. The attendant can then hold the call on the console, or release thecall as usual.When the attendant tries to present the call (after it has recalled to theattendant) to the wanted party, this party may have originated another call. Inthat case, the attendant receives the indication that the set is busy, and canthen camp-on the call again or release it, as usual. On a second camp-on, theattendant must activate the SACP feature again, if needed.The SACP feature is active either for all camped-on calls or on a per-call basisdepending on the customer option. When the per-call basis is chosen, theattendant activates the feature by pressing the SACP key before camping-onthe call. If the SACP key is pressed twice, the associated lamp goes dark, andthe SACP feature becomes inactive for the call.Series CallThe Series Call feature causes a source call (either an attendant-answeredincoming call, or an attendant-originated trunk call), that has been extendedto an internal destination party, to be recalled to the attendant when thedestination party hangs up. The attendant can then send the source call toanother destination party. This feature enables a caller to talk to more thanone party without having to disconnect and call again. Recall to SameAttendant must be allowed, otherwise the recall is routed to the first availableattendant. This process can be repeated for as many destinations as requestedby the caller.A Series Call is canceled if one of the following occurs:• the attendant presses the SECL key while the associated lamp is lit• the attendant extends the source to a trunk while the SECL lamp is lit• the attendant enters Night Service after extending the call and prior toreceiving the recall• the destination is call forwarded to a trunk• the source disconnects
