102 Using the User Option menuPrerequisitesThe handset must be in standby mode.Procedure StepsStep Action1 Perform one of the following options:• press and hold the LINE key, the User Options menuappears, or• while the handset is in standby state, press the Cfg soft key,highlight System Information.2 Use the Up and Down keys to scroll through the menu and selectPhone IPAddress.3 Press Enter.The IP address appears.4 Perform one of the following:• To return to the previous menu, press Back.• To return the handset to standby mode, press the PowerOff/End Call key, or press Exit.--End--View the server IP addressFollow this procedure to view the IP address and port number of the callserver.You cannot edit the IP address or port number.PrerequisitesThe handset must be in standby mode.Procedure StepsStep Action1 Perform one of the following options:• press and hold the LINE key, the User Options menuappears, or• while the handset is in standby state, press the Cfg soft key,highlight System Information.Carrier VoIPNortel IP Phone WLAN Handset User Guide (CICM)NN10042-116 04.01 Standard4 July 2008Copyright © 2008 Nortel Networks.