43.Logging onFollow these steps to log on. You must be logged onto the system to makeor receive calls.If you are unsure how to use the dialpad to enter text, see "Enter text usingthe dialpad" (page 105) before starting this procedure.PrerequisitesYou must be logged out.Procedure StepsStep Action1 Press the Power on/Start call key.The handset changes to the standby state.2 If you have Selective Gateway Login Feature configured on yoursystem, a screen appears where you can select a gateway.Press the down arrow to select a gateway (a check markindicates the current selection).3 Press Ok.The Login screen appears.4 Use keys on the dialpad to enter your user name.If your user name is longer than 19 characters, the charactersscroll to the left and an ellipsis appears to the left of the Username field.If you make a mistake entering your user name, press Clear andstart again.5 Press Ok.The password screen appears.6 Use the dialpad to enter your password. For security, the systemdisplays your password as asterisks.Carrier VoIPNortel IP Phone WLAN Handset User Guide (CICM)NN10042-116 04.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
