WLAN Handset 6100 Series Desktop Charger 125Attention: Do not place anything in the Desktop Charger other thanthe WLAN Handset 6120 and 6140, you can damage the contacts. Bentcontacts can stop the charging of the handset.Navigation• "Single Desktop Charger" (page 125)• "Dual Desktop Charger" (page 125)• "Quad Desktop Charger" (page 126)• Single Desktop ChargerProcedure StepsStep Action1 Press End to terminate any calls.The handset can be off or in standby state during charging.2 Place the handset, face forward, into the Desktop Charger.An animated charge icon indicates that charging is in progress.3 Charge the battery pack.If the handset is in standby mode, it displays its extensionnumber and Charging. It is fully operational and can receivecalls.If the handset is off, only Charging is displayed and the handsetcannot receive calls.It is normal for the battery pack to become warm when charging.4 When the handset is fully charged, Charge Complete isdisplayed. Remove the handset from the charger.--End--Procedure StepsStep ActionDual Desktop ChargerProcedure StepsStep Action1 Press End to terminate any calls.Carrier VoIPNortel IP Phone WLAN Handset User Guide (CICM)NN10042-116 04.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
