98 Using the User Option menu12 To play the highlighted setting, press Play.13 Press Enter to choose the tone.14 Do one of the following:• to return to the previous menu and choose another option,press Back, or• to exit all menus and return to the standby state, press theEnd key.--End--Select Ring VolumeProcedure StepsStep Action1 While the handset is in the standby mode, press the Cfg soft key.2 Use the Nav keys to scroll to User Profiles.3 Press Enter to select User Profiles. The next menu level isdisplayed.4 Use the Nav keys to scroll through the menu and highlight one ofthe settings. (an asterisk [*] indicates the selected/active setting).5 Press Enter to select the option.6 Use the Nav keys to scroll to Ring Setting.7 Press Enter to select the option.8 Use the Nav keys to select Ring Volume.9 Press Enter to select the option.10 Do one of the following:• to return to the previous menu and choose another option,press Back, or• to exit all menus and return to the standby state, press theEnd key.--End--Carrier VoIPNortel IP Phone WLAN Handset User Guide (CICM)NN10042-116 04.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
