114 Additional Call Features3 Press the number key that corresponds to the Override featureagain.The two parties remaining on the call hear an override tone, aconference call is established between all three participants. If aparticipant disconnects, the other two remain connected.4 To end the connection, press the End button.--End--Forced Camp-onFollow this procedure to use the Forced Camp-on feature to automaticallyring another handset (internal or external) immediately after that handsetdisconnects from its current call. Using Forced Camp-on in conjunctionwith Priority Override is referred to as Enhanced Override.Procedure StepsStep Action1 To use Forced Camp-on, if you receive a busy signal afterentering a number, press the LINE button to access the FeatureKeys menu.2 Press the number key that corresponds to the Override featureto initiate a Forced Camp-on.The party that you called receives a tone, and you receive aring/ringback signal or busy/engaged signal, depending on theoptions chosen. You are now camped-on to the number youentered.3 When the party that you called finishes their call, your handsetautomatically enters the number. Both your handset and theirhandset ring.To answer a call camped-on to your extension, go to Step 4.4 When your handset rings, press the Start button.You can program your handset for either Camp-on or CallWaiting, but not both.--End--Privacy ReleaseFollow this procedure to use the Privacy Release feature to enable one ormore people who share your DN to join a call.Carrier VoIPNortel IP Phone WLAN Handset User Guide (CICM)NN10042-116 04.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
