25.Installation preparationThis section provides basic information about the Ethernet Routing Switch8600 slots. It also include a checklist of the shipped accessories.Navigation• “Ethernet Routing Switch 8600 slots ” (page 25)• “DC power supply accessories” (page 26)• “Safety precautions” (page 27)Ethernet Routing Switch 8600 slotsThe Ethernet Routing Switch 8010co chassis provides eight slots forinstalling Ethernet Routing Switch 8600 interface modules and two slotsfor installing the Ethernet Routing Switch 8691SF/CPU and 8692SF/CPU(switch fabric) modules. Slots are numbered from left to right. InstallEthernet Routing Switch 8600 interface modules in slots 1 to 4 and 7to10. Slots 5 and 6 are reserved for Ethernet Routing Switch 8600 SeriesSF/CPU modules.The 8010 chassis provides eight slots for installing Ethernet RoutingSwitch 8600 interface modules and two slots for installing Ethernet RoutingSwitch 8691SF/CPU or 8692SF/CPU modules. Slots are numbered fromtop to bottom. Install Ethernet Routing Switch 8600 interface modules inslots 1 to 4 and 7 to 10. Slots 5 and 6 are reserved for Ethernet RoutingSwitch 8600 SF/CPU modules.The 8006 chassis provides four slots for installing Ethernet Routing Switch8600 interface modules and two slots for installing Ethernet Routing Switch8691SF/CPU or 8692SF/CPU modules. Slots are numbered from top tobottom. Install Ethernet Routing Switch 8600 interface modules in slots 1to 4. Slots 5 and 6 are reserved for Ethernet Routing Switch 8600 SF/CPUmodules.Nortel Ethernet Routing Switch 8600Quick StartNN46205-310 02.01 Standard30 May 2008Copyright © 2008 Nortel Networks.