4Installing DC power modules 44Cable preparation 49Installing a breaker interface panel 49Installing a PCMCIA software card 49Starting the system 49Turning on AC power supplies 49Turning on DC power supplies 50LED power supply 51Verifying a successful installation 51Configuration 53Connecting a modem using the CLI 53Connecting a modem using the NNCLI 56Connecting a VT-100 terminal or PC for local access 58Setting system date and time using the CLI 59Procedure job aid: config setdate command sample output 59Setting system date and time using the NNCLI 59Procedure job aid: clock set command output 59Changing passwords using the CLI 60Changing passwords using the NNCLI 63Configuring the system using the setup utility 65Procedure job aid: Setup Utility prompt descriptions 66Translation of safety messages 69Fan tray safety warning message 69Preventing back injury warning statement 70Preventing electrical shock warning statement 72Preventing hand injury warning statement 73Safety danger statement 74Injury to eye warning statement 75Safety practices and the hazards danger statement 77Safety practices and the hazards danger statement 78Preventing electric shock danger statement 80Nortel Ethernet Routing Switch 8600Quick StartNN46205-310 02.01 Standard30 May 2008Copyright © 2008 Nortel Networks.