Removing a power filler panel 33Procedure stepsStep Action1 Remove the equipment from the shipping container and placethe chassis on antistatic material.2 Check all items for damage.ATTENTIONIf the equipment is damaged, contact your Nortel salesrepresentative.3 Use the following chassis shipping accessories checklist to verifythat the shipping container includes all contents.Check Accessory Use toBracket kit: tworack-mounting bracketsand Phillips-head screws.Support the chassis in anequipment rack.Screw package Mount the chassis in anequipment rack.Side cable-managementbracket: two brackets forthe 8010 chassis and onebracket for the 8006 and8003 chassisManage network interfacecables.Rubber footpads Keep the chassis fromslipping when mountingon a flat surface.Console cable with built-inadapter.Connect an optionalmanagement console tothe chassis. Each cableend has a female DB9and a DB25 connector.Cable guide Keep cable clustersfastened and out of theway, but accessible formaintenance.--End--Removing a power filler panelA power filler panel maintains the proper cooling airflow in the EthernetRouting Switch 8600 chassis. You must remove the power filler panel fromthe power bay when you install a power supply in a bay for the first timeNortel Ethernet Routing Switch 8600Quick StartNN46205-310 02.01 Standard30 May 2008Copyright © 2008 Nortel Networks.
