Nortel NN46205-310 Quick Start Manual

Also see for Passport 8600 Series: Reference guide Installation Product brief Installing Commissioning

Contents

Configuring the system using the setup utility 65Configuring the system using the setup utilityUse the setup utility for the initial configuration of the switch. The setuputility uses a series of questions to guide you through the configurationprocess.ATTENTIONAnswer each question, or accept the default by pressing Enter. Each questionincludes the default value in brackets and the acceptable parameter options inparenthesis.Procedure stepsStep Action1 Power up the system.2 Connect through the console and logon as a default user usingthe following command:installATTENTIONYou must connect to the master CPU to use the install script.Afterrunning the setup utility, remember to reboot the switch.A Welcome to the Ethernet Routing Switch 8000 Setup Utilitymessage appears stating you are starting initial configuration ofthe switch. The data is stored in the /flash/boot.cfg and runtimeconfiguration flash/config.config files.3 If you want to continue, typey.4 Follow the setup utility prompts.See “Procedure job aid: Setup Utility prompt descriptions” (page66).5 Restart the switch.ATTENTIONYou can use a default password to log on if the switch rebootswithout any previously configured password, and the high secure(hsecure) mode is enabled. however, you will be prompted to changethe passwordFor more information about the secure mode, see Security,NN46205-601.--End--Nortel Ethernet Routing Switch 8600Quick StartNN46205-310 02.01 Standard30 May 2008Copyright © 2008 Nortel Networks.