Answering calls / 35P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator GuideChanging a telephone’s pickup groupTelephones can be put into and taken out of pickup groups.You will need the programming template found at the front of thisguide. See Getting started with Norstar for more information.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of the telephoneyou wish to program.4. Press ≠ twice.5. Press ‘ five times.6. Press CHANGE at Pickup grp: to assign the telephone to pickupgroup 1, 2, 3, or 4, 5, 6, 7, 8, 9, or to None.DisplaysTrunk AnswerThe Trunk Answer feature lets you answer a ringing call anywherein the system from any telephone in the system. The line you areYou are already connected to the telephonethat made the call you are trying to pick up.This can happen if you are on a call to aco-worker, your co-worker dials the numberof a telephone in your pickup group, and youattempt to pick up that call.There is no call that you can pick up or thecall that was ringing has already beenanswered.You have tried to pick up a call on someoneelse's private line.Enter the internal number of the telephonethat is ringing. (You may use an internalautodial button to do this.)If you decide not to answer a ringing call afteryou have activated Directed Pickup, pressƒ.ƒ°‚‚
