74 / Forwarding your callsNorstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02DisplaysLine RedirectionLine Redirection lets you send your external calls to a telephoneoutside the office. You may choose to redirect all your external linesor only some of them.You cannot use the Line Redirection feature on either an M7100telephone or a telephone connected to an ATA.Turning on Line Redirection• Press ƒ°›.• Select the outgoing line to be used for redirected calls.• Enter the number to which calls will be redirected (the ways youcan do this are listed below).• Select the lines to be redirected.Enter the telephone number to which you wish to redirect calls,using one of the following methods:• Press an external autodial button.• Enter an external telephone number (using no more than 24digits) then press ˙ or OK.• Press ˙ or OK if the line you have chosen as theoutgoing line is a private network line that does not require youto dial digits.There are several reasons why you may getthis message. For instance, you cannotforward your calls to a telephone that hasbeen forwarded to your telephone.Your calls are being forwarded to telephone221.Two or more telephones are linked in aforwarding chain, and one of them is out ofservice or is being used for programming.For other displays, see “Common feature displays” on page 149.ƒ°›
