80 / Communicating in the officeNorstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02Activating and deactivating the ability to pageYou will need the programming template found at the front of thisguide. See Getting Started for more information.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of the telephoneyou wish to program.4. Press ≠ twice.5. Press ‘ seven times. The display shows Paging.6. Press CHANGE to select the setting: Y (Yes) or N (No).Creating page zonesEach telephone can be assigned to one of six zones for receivingpages.You will need the programming template found at the front of thisguide. See Getting Started for more information.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of the telephoneyou wish to program.4. Press ≠ twice.5. Press ‘ six times. The display shows Page Zone.6. Press CHANGE to select the setting: 1, 2, 3,4, 5, 6 or None.You can make a telephone part of a page zone only if the telephonehas paging set to Y (Yes).A zone is any set of Norstar telephones that you want to grouptogether for paging, regardless of their location. The maximumnumber of sets in a page zone is 50.
