P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator GuideMaking callsThere are many ways to make a call. Depending on programmingand the type of call, these are the ways to make a call:• Pick up the receiver and dial. The Norstar system supports threemethods of dialing. See “Changing how you dial your calls” onpage 49.• Pick up the receiver, press a line button, and dial (if the call isnot on your prime line).• Press © and dial (to talk without using the receiver).See “Using Handsfree/Mute” on page 40.• Press ©, press a line button, and dial (to talk without thereceiver and if the call is not on your prime line).• Press a line button and dial (to talk without the receiver and ifAutomatic Handsfree is assigned to your telephone).• Use one of the features that make dialing easier. See “Timesavers for making calls” on page 55.DisplaysThe telephone you have called has nointernal lines available. Press LATER to usethe Ring Again or Message features or pressPRIORITY to make a priority call.You are dialing using Pre-dial. To erase anincorrect digit, press the left end of√ or BKSP. When the number iscomplete, select a line or lift the receiver.This prompt remains on your display as longas you are on a call you have dialed. Totransfer the call, press TRANSFER.Your telephone is already connected to thetelephone you are trying to call. Check youractive line buttons, and return to that call.
