Forwarding your calls / 75P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator GuideIf you use ALL to redirect all your lines, it is important that you waituntil all the lines on your telephone light up before pressing˙ or OK. If you press ˙ or OK before all the lines lightup, those lines not lit will not be redirected.Canceling Line Redirection• Press ƒ£°›.• Select the lines you no longer want to be redirected.Allowing a telephone to redirect callsYou can turn a telephone’s ability to redirect calls on and off.You will need the programming template found at the front of thisguide. See Getting Started for more information.1. Press ƒ••¤flfl‹››.2. Press ¤‹fl›fl (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of the telephoneyou wish to program.4. Press ≠ twice.5. Press “ four times. The display shows Allowredirect:.Tip -The line chosen for redirecting calls on otherlines can still be used normally when it is not busyon a redirected call. To avoid redirection failingbecause the chosen line is in use, choose a linepool with several lines in it.The system does not check that the number yougive for line redirection is a valid one. If you redirectto an invalid number, redirection will fail. Using anautodial button to enter the redirection numberhelps avoid this possibility. An autodial button usedfor line redirection must be programmed to use aspecific line.ƒ£°›
