28 Chapter 3 Task summaryNN40140-500NN40140-500iii) For calls coming in from the private networkConfiguration > Telephony > Dialing Plan > Private Network > Dialing Plan - PrivateNetwork panel > Private Network Settings subpanel > Private Received number lengthfieldandConfiguration > Telephony > Dialing Plan > Private Network > Dialing Plan - PrivateNetwork panel > Private Network Settings subpanel > Private DN length field(Private DN length is used for DPNSS applications only. See the Networking ConfigurationGuide (NN40020-603).)Internal Reference: Basic parameters on page 67External Reference: Networking Configuration Guide (NN40020-603)6 Verify the line pool assignment of VoIP trunks.In the default configuration, the VoIP trunks are assigned to line pool BlocA. Instructions inthe SRG50 Configuration Guide assume that the default configuration has been maintained.Configuration > Telephony > Lines > Active VoIP Lines > Active VoIP Lines table > LineType column > Line Type fieldExternal Reference: Networking Configuration Guide (NN40020-603)7 The SRG supports four analog loop trunks on the main unit*. Verify the line pool assignmentof these trunks.In the default configuration, these trunks are assigned to line pool A. Instructions in theSRG50 Configuration Guide assume that the default configuration has been maintained.Configuration > Telephony > Lines > Active Physical Lines > Active Physical Lines table> Line Type column > Line Type fieldExternal Reference: Networking Configuration Guide (NN40020-603)* Category 1 countriesIP telephone configuration1 Configure the registration password.Configuration > Resources > Telephony Resources > IP Sets row > Details for Modulesubpanel > IP Terminal Global Settings tabInternal Reference: Registration password on page 532 Configure the local mode indication (Advertisement/Logo).Configuration > Resources > Telephony Resources > IP Sets row > Details for Modulesubpanel > IP Terminal Global Settings tabInternal Reference: Local mode indication on page 55
