User Guide107www.bull.comNovaScale R410 E1 Power SupplyConnecting the Power CordPlug the female end of the AC power cord shipped with your system into the inputreceptacle on the rear of the power supply shipped with your system.Plug the male end of the power cord into NEMA 5-15R outlet for 100-120 VAC orNEMA 6-15R outlet for 200-240 VAC.If a power cord supplied with the system is not compatible with the AC wall outlet inyour region, obtain a suitable power cord that meets the following criteria:■ The power cord must be rated for the available AC voltage and have a currentrating that is at least 125% of the current rating of the system.■ The power cord connector that plugs into the wall outlet must be terminated in agrounding-type male plug designed for use in your region. It must havecertification marks showing certification by an agency acceptable in your region.■ The power cord connector that plugs into the system must be an IEC- type CEE-22female connector.■ The power cord must be less than 1.8 meters (6.0 feet) long.When connecting the power cord to a power control unit such as a UPS unit, confirmthat the power control unit is powered OFF. Connecting the power cord while power issupplied to the power control unit may cause a failure.WarningA power cord is provided for the power supply shipped with yoursystem. Do not attempt to modify or use the supplied AC powercord if it is not the exact type required.
