User Guide221www.bull.com7. Grasp the processor (use your index to hold the load plate side, and your thumbto hold the lever side).8. Lift the processor straight and away.9. Set the processor immediately in its protective cover.- Hold the CPU by three of its corners.- The chamber of the protective cover should match the connection 1 on theCPU.- The rentention tabs on the cover and the processor contacts should pointeach other.Installing a CPU1. Remove the processor from its shipping materials, and, if applicable, removeits protective cover.Figure 169: Removing from the shipping materialsCaution■ Do not touch the processor sensitive contacts.■ Hold the processor by the substrate edges.2. Locate the connection 1 indicator and the two orientation key notches on theCPU and on the socket.3. Grasp the processor with your thumb and index finger by the orientation keynotches.4. Carefully lower down the processor into the socket body.Figure 170: Installing the processor
