User Guide192www.bull.comCable RoutingWhen you add or remove components from your server, make sure your cables arerouted correctly before reinstalling the server cover. Use caution to make sure nocables or wires are pinched and that the airflow from the fans is not blocked. Use thefigures below to determine the correct cable routing.For readability, separate figures for power cable routing and data cable routing areincluded below. Make sure all necessary power and data cables are connected androuted as shown. Dashed lines in the drawings indicate a location where a cable isrouted beneath a component and each connector end is labeled with the same letter.Power Cable RoutingFigure 136: Power Cable RoutingA: Processor power E: Connector closest to power supply to HDD1B: Main power F: Right system blower fanC: End connector to optical drive G: Left system blower fanD: Center connector to HDD0 H: PCI cooling fanBACDFGHE
