User Guide251www.bull.com■ Procedure with the standard start menu: click Start menu, [ControlPanel], [Network Connections], and [Local Area Connection].■ Procedure with the classic start menu:a. Click Start menu, Click [Settings] and Click [Network Connections].The [Network Connections] dialog box is displayed.b. Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter is displayed.3. Click [Advanced] and specify the [Link Speed & Duplex] value the same as thevalue specified for HUB.4. Click [OK] on the property dialog box for network adapter.[When PROSet is installed]1. The [Intel PROSet] dialog box is displayed.■ Procedure with the standard start menu: click Start menu, point to[Control Panel] and click [Intel PROSet].■ Procedure with the classic start menu:a. Click Start menu, point to [Settings] and click [Control Panel].b. Double-click [Intel(R) PROSet] on the [Control Panel] window.2. Click [(Network Adapter Name)] in the list.3. Click [Speed] and specify the [Link Speed & Duplex Settings] value the sameas the value specified for HUB.4. Click [Apply] and click [OK].Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network whichcan be displayed from [Network and Dial-up Connection].Note: We recommend you to add [Network Monitor] at[AddingServices]. [Network Monitor] can monitor the frame (orthe packet) that the computer installing [Network Monitor] sendsor receives. This tool is valuable when analyzing networktrouble. For information on how to install the tool, see the"Setup for TroubleProcess" later in this document.Re-install the Network DriverThe network driver will be installed automatically.Graphics Accelerator DriverUpdate Graphics Accelerator Driver Mounted in Standard.
