User Guide117www.bull.comConfiguring Your SystemConfiguration and setup utilities are used to change your system configuration.■ RAID Configuration UtilitiesDepending on your configuration (SATA, SCSI, SAS, combination of these) andon your disk drive controller, one or several RAID Configuration SoftwareUtilities may be available on your system. These software utilities may allow youto perform some of the following actions: configure the RAID level, setup arrays,format the drives, etc.■ BIOS Setup UtilityYou can configure your system, as well as option boards you may add to yoursystem, using the BIOS Setup Utility. Several unique system parameters areconfigured using the BIOS Setup, which is stored in the system FLASH memory.If your system has been factory configured, the BIOS Setup Utility does not needto be run unless you want to change the password or security features, add certaintypes of option boards or devices, or upgrade your system board.For more information about the BIOS Setup Utility, see “BIOS Setup Utility” onpage 288.
