User Guide62www.bull.comSelecting Server SiteTo use the server, install it in a standard EIA 19-inch rack assembly.Refer to the documentation attached to the rack or contact your sales agent for moreinformation about setting up the rack.WarningObserve the following instructions to use the server safely. Failure tofollow these instructions may result in death or serious personal injury.See “General Safety Information” on page 132 for details.■ Do not use the server in any unapproved place.■ Do not connect the ground line to a gas pipe.CautionObserve the following instructions to use the server safely. Failure tofollow these instructions may cause a fire, personal injury, or propertydamage. See “General Safety Information” on page 132 fordetails.■ Do not carry or install the server on your own.■ Do not concentrate the load in the rack.■ Do not pull out a device from the rack if the rack is unstable.■ Do not pull out more than one device at a time from the rack.■ Do not exceed the rating power of the cables.Do not install the rack in the places listed below. Installing the rack or mounting theserver in the rack installed in such places may cause some malfunctions to occur.■ Narrow space from which the devices cannot be pulled out from the rackcompletely.■ Place that cannot bear the total weight of the rack and devices mounted on the rack.■ Place where the stabilizers cannot be installed or where the rack can be installedonly after the practice of proper earthquake-resistant construction.■ Place of uneven or slanting floor.■ Place enduring drastic temperature changes (near a heater, air conditioner, orrefrigerator).■ Place where intense vibrations may be generated.■ Place where corrosive gazes are generated, chemicals are nearby, or chemicalsmay be accidentally sprayed over.
