05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & ParametersAP 5.4 Gen II – AP 5.6AP 4.4 – AP 5.464-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)54The range of the value automatically measured by the gap detection can bedefined specifically for the label material. This allows materials with high-con-trast proof points within the label to be processed, which would otherwise bemeasured as 'false' gaps by the system. The corresponding setting value isthen equal to, or smaller than, the value measured at the actual gap.Punch level64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6 Only if PRINT PARAMETERS > Punch mode = „Manual“.xxx Setting range: 0 to 255; Unit interval: 1The value xxx stands for the current contrast within the photoelectric switchof the material which has just been inserted. This serves to determine athreshold value for the inserted material.xxx = current measurement at the punch sensoryyy = set threshold valueExampleSelf-adhesive material with black bars lengthways across the label• Reading:– Masking paper: 30– Masking paper + label: 60– Masking paper + label + black bars: 190• Setting value: 60A setting value of 60 means that all readings over 60 are ignored, thereforealso the reading 190 at the black bar.PunchlevelPunch xxx Val yyy
