05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & ParametersAP 5.4 Gen II – AP 5.6AP 4.4 – AP 5.464-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)144SERVICE FUNCTIONService64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6 Parameter only appears in production mode.Increases the counter level of the "Service" counter on the "Service Status"printout by one. See parameter Service Status on page 36.yes Increases the counter "Services" by oneno Doesn´t increase the counterHead exchange64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6 Parameter only appears in production mode.Increases the counter „Head number“ on the info printout „Service Status“ byone. See parameter Service Status on page 36.yes Increases the counter "Head number" by oneno Doesn´t increase the counterRoller exchange64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6 Parameter only appears in production mode.Increases the counter „Roll number“ on the info printout „Service Status“ byone. See parameter Service Status on page 36.yes Increases the counter "Roll number" by oneno Doesn´t increase the counterCutter exchange64-xx AP 5.4 AP 5.6 Parameter only appears in production mode and only with a cuttermounted and activated.Increases the counter „Cutter number“ on the info printout „Service Status“by one. See parameter Service Status on page 36.
