Nussbaum BT 610 Operating Instructions Manual
                                                                                                | |
Contents
| 
70 26.11.07 1 689 979 924N9.1 Entry of permissible total vehicle weightz Entry of towing vehicle or entire vehicle Using the keys G (65) 0...9 and E (60),enter the vehicle weight in kg.Example: Total vehicle weight = 6,000 kg G 6 0 0 0 E9.2 Entry of calculation pressure (entire vehicle) Using the keys P (63) 0...9 and E (60),enter the calculation pressure of the axle.. (61) is the decimal point for pressure values.Example: Calculation pressure = 4.5 bars P 4 . 5 E9.3 Entry of calculation pressure for each axle Using the keys P (63) 1...8 P (63) 0...9 . and E (60),enter the calculation pressure.Example: Calculation pressure of axle 4 is 3.2 bars. P 4 P 3 . 2 and E9.4 Distinguishing between towing vehicle/trailerIn order to distinguish between towing vehicle and trailer in thelogs, this can be selected by the following entry: KeysF (53) 1 and E (60) .This must be entered after the test of the final axle of the towingvehicle (current axle becomes final axle of towing vehicle).9.5 Allocation of the AUBS to the SBS and/or the PBS9.5.1 Non-independent auxiliary braking system Using the keys „HBA“ (54) 1 or 2 (9) „HBA“ (54) and „1..8“(61) „BBA“ (53) or „FBA“ (55) and „ENTER“ (60), everychecked brake value can be assigned to any arbitraryauxiliary braking system.Example 1:The SBS of axle 2 was tested.The measuring values shall be allocated to the AUBS 2. Press the keys „HBA“ (54) 2 (9) „HBA“ (54) and „2“ (61)„BBA“ (53) and „ENTER“ (60).Example 2:The PBS of the axle 3 was tested.The measuring values shall be allocated to the AUBS 1. Press the keys „HBA“ (54) 1 (9) „HBA“ (54) and „3“ (61)„FBA“ (55) and „ENTER“ (60).9.5.2 Independent auxiliary braking system Using the keys f (54) 1 (or 2) f (54) and E (60),the next tested axle of the auxiliary braking system AUBS 1(or 2) is allocated. Further axes are also allocated to theselected AUBS, until a change-over to the SBS or PBS iscarried out.Example:Changing over to independent auxiliary braking system, for in-stance AUBS1 Press the keys f (54) 1 f (54) and E (60).Change-over to SBS Press the key F (53).9.6 Change-over of pressure display By means of the keys P (63) and U (62)the pressures pm and pz are displayed. |
manualsdatabase
Your AI-powered manual search engine