Page: 33Service Guide OL400Chapter 3 Maintenance & Disassembly3.1 MAINTENANCE3.1.01 General InformationThis section lists the parts replacement, adjustment, cleaning, and lubrication procedures.Disassembly should not be performed unless absolutely necessary. NEVER perform disassemblyon a malfunctioning unit until you have followed the failure analysis procedures in Section Four ofthis Service Handbook.Follow the procedures listed in Adjustments and Service Settings. Adjustments may be requiredwhen either consumables or parts are replaced. Failure to perform these procedures could resultin unnecessary service calls.Cleaning procedures must be performed correctly if high print quality is to be achieved.Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA BusinessPartner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
