Page: 56Service Guide OL400Chapter 3 Maintenance & Disassembly3.2.20 Hopping Roller1. Perform these procedures:3.2.01{ }3.2.02{ }3.2.03{ }3.2.04{ }3.2.05{ }3.2.15{ }3.2.17{ }2. Remove the two screws (1) and slide the upper plate assembly (2) until the claws (3) areunlocked.3. Push the hopping roller shaft (4) to the left to unlock it.4. Remove the hopping gear pin (5).5. Remove the E-clips (6).6. Remove the hopping roller pin (7).7. Slide the hopping roller shaft to the right and remove the hopping roller (8).
