Page: 50Service Guide OL400Chapter 3 Maintenance & Disassembly3.2.14 Transfer Charger Assembly1. Turn the power switch OFF and unplug the AC power cord from the outlet.2. Press the OPEN button and raise the stacker cover.3. Remove the image drum cartridge (1). (See 3.2.2)4. Push the lock lever (2) towards the back of the printer to raise the upper unit (3).5. Firmly push down and back on the sides of the transfer charger assembly (4) until the lowercover claws are disengaged from the square holes on each end of the transfer charger assembly.6. Lift and remove the transfer charger assembly.Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA BusinessPartner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
