Page: 65Service Guide OL400Chapter 3 Maintenance & Disassembly3.3.07 Darkness ControlGeneral InformationThe Darkness Control is adjusted from the Level 2 Menu. This adjustment changes the degree ofcharacter density.Procedure1. Place the printer off-line.2. Press and hold MENU more than 2 seconds. The first menu category will appear on thedisplay.3. Press MENU until "Darkness" appears on the display.4. Press "+" to toggle through the values until the desired setting is reached.5. Press ENTER/MENU RESET to store the new setting.Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA BusinessPartner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
