Basic Operations 6-29Basic OperationsStore Mode (continued)RADF Store ModeUse this feature to scan more than 100 original into memory from the RADF. Use thisfunction in conjunction with the Reserve function to increase efficiency of the copyingjob.❒ Incompatible Basic Copying Conditions: None❒ Incompatible Special Originals: Resolution (Very high)❒ Incompatible Applications: Image insert, Book copy, Storing Image in Overlay Memory1 Touch STORE on the Basic Screen to highlight it.2 Make the desired copying selections.3 Position originals FACE UP on RADF.If the number of originals exceeds 100, divide them into blocks not exceeding 100sheets and load them from the block with the first page.4 Enter the print quantity, using the keypad. The entered quantity will be displayed onthe upper right message area of the Basic Screen.To change the print quantity, press [ C (CLEAR QTY.) ] and re-enter the correct quantity.5 Press [ START] to scan the originals.6 Repeat steps 3 and 5 until all originals are scanned.To delete the scanned data without printing, press [ STOP], then touch CANCEL on thepopup menu to ensure that you delete the data.7 Touch STORE to exit the Store mode.8 Press [ START]. The copier starts the printing job.Basic Screen
