7-2 Output ModesOutput ModesFinisher / Finisher-Folder SpecificationsUse only paper that is recommended by Océ and stored under the environmentalconditions stated for copy quality. Special stock is not guaranteed for reliability or copyquality. Multi-sheet bypass tray, Interrupt, and Transparency interleaving areincompatible with finisher use.This Finisher also accommodates wide paper sizes in addition to the standard sizesdescribed below. See p. 4-9 ~ p. 4-10.Finisher Type❒ Primary (Main) Tray with built-in 2 stapling: moving tray typeSecondary (Sub) TrayBooklet Tray (Finisher-Binder only)Cover Sheet Feeder (option)Trimmer Unit (option) (Finisher-Folder only)Primary (Main) Tray• Non-Sort Mode❒ Paper size: 11"x17"~5.5"x8.5"❒ Paper weight: 16~24 lb; Special stock (65 lb (176 g/m 2 cover paper), transparency film, labels,hole punch, rag content)❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"3,000 sheets 8.5"x11", 8.5"x11"R1,500 sheets 11"x17", 8.5"x14"• Sort Mode/Group Mode❒ Paper size: 11"x17"~5.5"x8.5"❒ Paper weight: 16~24 lb❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"3,000 sheets 8.5"x11", 8.5"x11"R1,500 sheets 11"x17", 8.5"x14"• Staple-Sort Mode❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11"❒ Paper weight: 16~24 lb❒ Paper capacity for 20 lb: 1,000 sheets* 1❒ Staple capacity: 50 sheets* 2 (5.0mm thick or less)❒ Staple position: See p. 7-9.NOTES:*1: Variable according to the number of pages to be stapled. See p. 4-9 for detail.*2: Staple sheet capacity is changeable, and may be set to 45, 40 or 35 by service.
