Key Operator Mode 14-7Key Operator ModeSystem Initial Setting [1]Set the following initial conditions of the copier.• Date & Time setting: Current date and time, summer time• Language select setting: Language used in LCD (English)• IP address setting: IP address to be accessed from PCDate & Time Setting [1]Set the current date and time, and also the summer time.r Default setting: Summer time offSystem Initial Setting Menu Screen Date & Time Setting Screen1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode.Enter a 4-digit key operator password, then touch OK to display the Key OperatorMode Screen.NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.2 Touch [1] System initial setting to display the System Initial Setting Menu Screen,then touch [1] Date & Time setting to display the Date & Time Setting Screen.3 Adjust the time.The time indicated by the copier is displayed in the upper line and ordered by date,month, year, and time (in 24-hour expression). In the lower line, the highlightedsection can be changed by using the keypad on the screen.Touch SET to move the highlighted section to the number to be changed.4 To activate the summer time function, touch Summer time to highlight it. The Presenttime will gain an hour.5 Touch OK to update the Present time by the Setting time and return to the SystemInitial Setting Menu Screen.6 If no further changes are required, proceed to step 8.7 If other system initial setting changes are required, touch the key.8 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.9 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
