14-14 Key Operator ModeKey Operator ModeUser Setting Mode [3] (continued)User Lens Mode Ratio Setting [3]The preset and userset ratios available on the Basic Screen are used to reduce andenlarge the original image to accommodate copy paper size.Normally, users are allowed to change the three USERSETs in the bottom line on theUser Lens Mode Ratio Setting Screen. The preset keys in the top and middle lines canbe programmed in 2-5 DIPSW mode for special purposes, but ordinarily, it isrecommended that they remain unchanged.r Setting options: Userset or Preset ratior Default setting: USERSET1: 4.00USERSET2: 2.00USERSET3: 0.50User Setting Mode Menu Screen User Lens Mode Ratio Setting Screen1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode.Enter a 4-digit key operator password, then touch OK to display the Key OperatorMode Screen.NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.2 Touch [3] User setting mode to display the User Setting Mode Menu Screen, thentouch [3] User lens mode ratio setting to display the User Lens Mode Ratio SettingScreen.3 Touch the USERSET you want to change, then enter a ratio from 0.33~4.00, using thekeypad.If a ratio under 0.33 is entered, 0.33 will be displayed.If a ratio over 4.00 is entered, 4.00 will be displayed.4 Touch OK to complete the setting and return to the User Setting Mode Menu Screen.5 If no further changes are required, proceed to step 7.6 If other user setting changes are required, touch the key.7 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.8 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
