14-36 Key Operator ModeKey Operator ModeWeekly Timer [9] (continued)Timer Interrupt Password Setting [5]Use this password setting mode to establish a 4-digit password requirement for usingTimer Interrupt function. The default password of 0000 allows the timer function to beinterrupted without the requirement for password entry.Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode.Enter a 4-digit key operator password, then touch OK to display the Key OperatorMode Screen. (See note 1.)2 Touch [9] Weekly timer. Enter your 4-digit Weekly timer master key code, then touchOK to display the Weekly Timer Setting Menu Screen. (See note 2.)NOTES:1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.2 If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.3 Touch [5] Timer interrupt password set to display the Timer Interrupt PasswordSetting Screen.4 Use the touch screen keypad to enter a 4-digit password, and then touch OK tocomplete the setting and return to the Weekly Timer Setting Menu Screen.NOTE: When the password setting is 0000, timer interrupt can be used simply by turning the copier OFF,then ON. In this case, you will be asked to enter the duration of use (a period of time to turn the copierpower on).5 If other Weekly timer setting changes are required, select the desired menu item,from [1]~[5].6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other keyoperator setting changes are required, select the desired menu item, from [1] to [18].7 If no further changes are required, touch PREVIOUS SCREEN to restore the BasicScreen to perform copying operations.
