Setting up network printing 4VarioLink 2221/2821/3621 4-29– Printer Number: Specify "255". (Set the number assigned to theprinter (0 to 254) or 255.)6 Restart this machine (turn the main power off, then on again).7 Use the NetWare server console to load PSERVER.NLM.8 Use the NetWare server console to display the print server screen, andthen check that "XXX" (created printer) is shown as "Waiting for Job"for the connected printer (0).2 ReminderWhen turning the machine off, then on again with the main power switch,wait about 10 seconds to turn the machine on after turning it off. Themachine may not operate correctly if it is turned on immediately afterbeing turned off.For NetWare 4.x/5.x/6 Print Server mode (NDS)To use the Print Server mode, IPX protocol must be loaded on the NetWareserver.1 Log on to NetWare as an administrator from a client computer.2 Start up NWadmin.3 Select either the organization or organizational unit container thatoffers the print service, and then click "Print Services Quick Setup(non-NDPS)" on the "Tools" menu.4 Enter the appropriate names in the "Printer Server Name", "PrinterName", "Print Queue Name", and "Print Queue Volume" fields, select"Other/Unknown" from the "Printer Type" field, and then click the[Create] button.– For queue user privileges, printer notification option, assignment ofmultiple queues, and passwords, refer to the NetWaredocumentation, and specify settings as necessary.
