Setting up the VXL/VPS driver (Windows Vista/Server 2008) 8VarioLink 2221/2821/3621 8-15Proof PrintWhen a print job is sent, this machine stops printing temporarily after part ofthe document has been printed. The remaining print job is stored in thismachine as a print job. When printing multiple copies, you can print theremaining part of the print job after checking the print results.2 NoteTo print the document, release the held document from the Job mode inthis machine’s control panel. For details, refer to "Print job management"on page 11-82.Proof and Print can be specified when "Collate" is specified.Specifying the user authentication settingsIf the user authentication settings have been specified on this machine, youmust enter a user name and password.2 NoteIf a job is printed using a user name or password that is not a registeredaccount on this machine, or if a job is printed without selecting a userunder "User Authentication", the operation is not authenticated by thismachine and the job is canceled.When user authentication is specified on this machine and the EnhanceSecurity mode is enabled or when Access Lock is enabled on thesoftware DIP switch, the corresponding user may be locked out anddenied access if the authentication information is not entered correctly.For details on user authentication and Enhance Security mode, refer toUser manual [Copy Operations].If the user authentication settings are not specified on the Configure tab,user authentication cannot be performed. If using the user authenticationfunction, be sure to specify the settings on the Configure tab. For details,refer to "Specifying the Configure tab settings" on page 8-39.
