9 Setting up the PPD driver (Mac OS 9.2)9-12 VarioLink 2221/2821/3621Printer specific options (finishing options 1 to 3)You can specify printer-specific options. You can specify these optionswhen using the staple or hole punch functions of this machine.1 From the "File" menu, select "Print".2 Select "Finishing Options 1 to 3".3 Specify settings for the following:– Offset: Specifies offset.– Output Tray: Selects the output tray.– Binding Position: Specifies the binding position.– Duplex: Performs duplex printing.– Combination: Specifies booklet printing.– Staple: Performs stapling.– Hole-Punch: Performs hole punching.– Center Staple and Fold: Folds the printouts in half and staples.– Front Cover Page: Attaches a front cover page.– Back Cover Page: Attaches a back cover page.– Paper Tray (Cover Page): Selects the input tray for the front coverpage and back cover page.– Transparency Interleave: Inserts interleaves between overheadprojector transparencies.– Paper Tray (Transparency Interleave): Selects the input tray for thetransparency interleaves.– Wait Mode: Stops printing temporarily after part of the documenthas been printed so that the proof print can be checked.– Resolution: Specifies the resolution.
