2 Overview2-10 VarioLink 2221/2821/36212.3 Setting up the systemIn order to use this printing system, it must first be set up.Setup consists of connecting this machine to a computer and installing theprinter driver onto the computer being used.To set up the printing systemSetup the printing system as described below.1 Connect this machine to a computer. (Refer to "Connectableinterfaces" on page 2-8.)2 Install the printer driver. (Refer to "Installing the printer driver" onpage 3-3.)3 When using a network connection, set up the network. (Refer to"Setting up network printing" on page 4-3.)4 Check the setup by printing a test page. (Refer to "Test printing" onpage 5-4.)5 Install the screen fonts.– The DVD-R contains the Latin TrueType fonts as the screen fonts.– Install the screen fronts after adding the operating system standardfonts.– For details, refer to Help of the operating system.– The screen fonts are located on the DVD-R.– To install the Macintosh fonts, install the fonts after decompressingthem.Installation of the printer driver may differ depending on the connectionmethod used with this machine in addition to the operating system of thecomputer and the type of printer driver being used.!DetailFor details on connecting this machine to a computer, refer to"Connectable interfaces" on page 2-8.
