12 Troubleshooting12-6 VarioLink 2221/2821/362112.2 Unable to specify desired settings or unable to printas specifiedPerform these troubleshooting procedures if you cannot specify the desiredsettings in the printer driver, or if the print results do not represent thesettings that have been specified.2 NoteSome of the printer driver functions cannot be combined with otherfunctions.Symptom Probable cause ActionA printer driver settingcannot be selected.Some functions cannot be com-bined.Do not try to select settings thatare not available.The "Conflicts" messagewith "Unable to Select" or"Function Canceled" ap-pears.An incorrect combination offunctions has been specified.Check the settings and specifythe functions correctly.Printing is not performedas specified.Incorrect settings are specified. Check each setting in the printerdriver.A combination of functions, al-though possible in the printerdriver, is not possible with thismachine.The paper size, orientation, andother settings specified in theapplication have priority overthose specified in the printerdriver.Enter the correct settings in theapplication.The watermark cannot beprinted.The watermark is not correctlyset.Check the watermark settings.The watermark density is set toa level that is too low.Check the density settings.Watermarks cannot be printedin graphics applications.No watermark can be printed inthis case.The staple function can-not be specified.Stapling is not possible if "PaperType" is set to "Thick" or"Transparency".Check each setting in the printerdriver.The staple function requires op-tional finisher.Install the required optional fin-isher and enable it using theprinter driver.Stapling cannot be per-formed.If there are a large number ofpages to be printed, staplingcannot be performed.Print by specify the number ofpages per set for the number ofpages that can be stapled.Stapling is not possible if thedocument contains pages of dif-ferent sizes.Check the document.
