VarioLink 5022/VarioLink 4222/VarioLink 3622 5-7Receiving data (G3/IP/I-FAX) 55.6 Recording data upon receptionWhen a received document is recorded on paper, the paper size of the received document is compared withthe size of the paper placed in the tray, and a preset reduction ratio is applied to recording of the documenton the paper. Otherwise, an appropriate reduction ratio is applied so that the document may be output onthe prepared paper. However, if full-size output is specified, the document is recorded in full size regardlessof the paper size of the received document.5.6.1 To output in reduced printingWhen the received document is of the standard size, it is printed out on paper of that size at a presetreduction ratio. (Default setting: 96%)2 NoteFor details on reduction ratio setting, refer to "Min. Reduction for RX Print" on page 9-27.5.6.2 To output in reduced printing according to the paper sizeIf a document of a size longer than the standard is received, an optimal paper size is determined based onthe width and the length of the received document, and the contents are recorded on paper of that size. Ifpaper of the optimal size is not placed in the tray, a reduction ratio is applied so that the document is outputon paper of a similar size.The following section provides reference data for determining the optimal paper size and selecting paperfrom those in the tray.Original Received originalReducedaccording tothe settingspecified for"Min.Reductionfor RX Print".Original Received originalReduced tofit the paper
