VarioLink 5022/VarioLink 4222/VarioLink 3622 3-2Registration of basic information 33 Registration of basic information3.1 To begin operationWhen starting operation of the product for the first time, register the following.3.1.1 Required environment and equipmentThe following table shows environment and equipment required to enable respective functions.3.1.2 Network connection and settingsTo use the function to transmit image data via a network connection such as network scan and network faxfunctions, connecting this machine to the network and settings for network use are required.Network connectionConnect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on themachine.Network settingsAssign an IP address to the machine and complete settings for the SMTP server, etc. For details, refer to theUser’s Guide [Network Administrator].Description Environment and equipmentNetwork scan function • Network connection• Network settingsG3 fax function • Installation of the fax kit (optional)• Connecting a modular cableNetwork fax func-tionInternet fax • Installation of the Image controller (optional) and hard disk (option-al)• Network connection• Network settingsIP address fax • Installation of the fax kit (optional), Image controller (optional) andhard disk (optional)• Network connection• Network settings
