VarioLink 5022/VarioLink 4222/VarioLink 3622 9-46Administrator mode settings 99.5.8 Fax Settings - TX/RX SettingsFor the setting procedure, refer to "Fax Settings - TX/RX Settings" on page 9-24.!DetailTo enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".The available tray types vary depending on the options that are installed.9.5.9 Fax Settings - Function SettingsFunction ON/OFF Setting - Destination Check Display FunctionFor the setting procedure, refer to "Function ON/OFF Setting - Destination Check Display Function" onpage 9-30.Memory RX SettingFor the setting procedure, refer to "Memory RX Setting" on page 9-31.9.5.10 Fax Settings - Report Settings - Output SettingsActivity ReportFor the setting procedure, refer to "Activity Report" on page 9-36.TX Result ReportFor the setting procedure, refer to "TX Result Report" on page 9-36.Sequential TX ReportFor the setting procedure, refer to "Sequential TX Report" on page 9-37.Broadcast Result ReportFor the setting procedure, refer to "Broadcast Result Report" on page 9-39.TX Result Report CheckFor the setting procedure, refer to "TX Result Report Check" on page 9-39.Network Fax RX Error ReportSpecify the output setting for the network fax RX error report. Select the option to output or not to output.
