VarioLink 5022/VarioLink 4222/VarioLink 3622 7-10Explanation of reports/lists 77.3.2 TX Result reportTransmission results are automatically printed out. In the Administrator Settings screen in the Utility mode,the printing interval can be selected from "ON", "If TX Fails", and "OFF".Result OK: Printed when transmission has completed successfullyS-OK: Printed when transmission is abortedPW-OFF: Printed when the power is switched off during transmissionTEL: Printed when a phone call is receivedNG: Printed when a transmission error has occurredContinue: Printed when a transmission error has occurred and the job has been putin a queue for retransmission (error page redial)No response: Printed when the recipient does not respondBusy: Printed when the recipient line is busy and transmission is disabledMemory full: Printed when the fax file memory becomes full and reception has failedLOVR: It is indicated when receiving page length exceeds 1,000 mm. (IP addressfax/Internet fax)POVR: The upper limit of received pages is exceeded. Printed when the number ofreceived pages has exceeded 3,000 pages (IP address fax/Internet fax)FIL: File error. Printed when the type of the received file is not supported (IP addressfax/Internet fax)DC: Decoding error. Printed when an error has occurred while decoding the receivedfile (IP address fax/Internet fax)MDN: Printed when an error has occurred during MDN response reception (Internetfax)DSN: Printed when an error has occurred during DSN response reception (Internetfax)Remarks One of the following is printed.L1: Main lineTMR: Timer TXORG: Original size specifiedMIX: Mixed mode transmissionCSRC: Remote diagnosisPC: PC-FAXSP: Special OriginalRTX: ResendingMBX: ConfidentialL2: Auxiliary linePOL: PollingFME: Transmission with the frame erasedCALL: Manual transmissionFWD: ForwardingBND: Binding position of the originalFCODE: F code specifiedRLY: RelayBUL: BulletinIPADR: IP address faxI-FAX: Internet faxItem Description
