Basic Job Settings 6VarioPrint 1105 6-476.9.1 To Select Paper Size Automatically (APS)APS detects the original size placed on the ADF or original glass and auto-matically selects and feeds copy paper of the same size, or selects an ap-propriate size according to the magnification ratio selected.!DetailsThe original sizes to be detected from the ADF or original glass are pre-viously determined. For details, refer to “ADF Originals” on page 3-12.The original sizes to be detected from the ADF or original glass can bechanged by the machine manager. For details, refer to “07 Size Setting”on page 17-35.The machine manager can designate the tray or paper condition incom-patible with APS. For details, refer to “02 Each Function Setting” onpage 16-46.The machine manager can deactivate APS when original is set in the ADFor on the original glass.Specifications for APS:- APS is incompatible with AMS, however, Rotation is available.- APS will not select the tray of the size specified as non-standard or widesize.1 Touch [Auto Paper Select] at lower right corner of the Copy Screen.2 Select additional copy conditions as desired, then position original(s).
