9 Setting Output Methods9-64 VarioPrint 11058 Make fine adjustments for the lead edge, trimming width, and imageposition of the cover.- Touch Fine Adjustment to display the Fine Adjustment Screen.- To adjust the lead edge of the cover, touch [Cover Lead Edge Adj.]- Use [+5–] to select positive/negative, then use the screen keypad,arrow keys + and ,, or the control panel keypad to enter the de-sired value.- To adjust the trimming width, touch [Cover Trimming Adj.].- Use [+5–] to select positive/negative, then use the screen keypad,arrow keys + and ,, or the control panel keypad to enter the de-sired value.- To adjust the image position of the cover, touch [Cover Image ShiftAdj.].- Touch [Front] or [Back] to select the printed side, then [Up/Down]or [Right/Left] to select the direction to be adjusted.- Use [+5–] to select positive/negative, then use the screen keypad,arrow keys + and ,, or the control panel keypad to enter the de-sired value.- Touch [OK] to complete the setting.9 Touch OK to return to the Copy Screen.10 Select additional copy conditions, as desired.- When making double-sided copies, select [1-2] or [2-2].- If the original count exceeds 100, use Memory Scan mode.
