Setting Output Methods 9VarioPrint 1105 9-717 Press [Start] on the control panel of the master machine.The Tandem icon will display on the Copy Screen of the tandem ma-chine to indicate that the two copiers will start working in tandem.The tandem mode will be released automatically when the tandemmode copying is completed, and the Master and Tandem icons oneach Copy Screen will disappear.!DetailsEntering reserve job during Tandem mode copyingIf scanning of the next reserved job is performed during the tandem modecopying, that job will also be performed in the tandem mode. Up to 100jobs including the present job can be reserved.Interrupt mode during Tandem mode copyingInterrupt copying is available only on the copier with [Interrupt] pressed.The tandem mode copying on the copier in interrupt mode will be sus-pended until the interrupt copying is completed.Tandem mode and Power Save functionsIf the tandem mode is selected while the tandem machine is in Auto lowpower mode, the power saving mode will be released automatically.The tandem mode will not be selected when the tandem machine isturned off by Auto shut-off. Release the Auto shut-off mode by pressing[Power Save].If Auto low power is activated on the tandem machine during the tandemjob setting, the power saving mode will be released automatically whenprinting job starts.
