Browser Control Setting 18VarioPrint 1105 18-6518.12 Administrator Mode – Network TabThe [Network] tab shows settings concerning the printer controller network.18.12.1TCP/IPTCP/IPThis screen appears when you click [TCP/IP] on the [Network] tab. Thescreen is used to set a summary of the image controller interface (TCP/IPsettings).When TCP/IP is set to disable, you still need to set parameters. Make sure toenter parameters correctly.-Enter for individual items.TCP/IP, Speed, Auto IP, IP Address, Subnet Mask, Default Gateway,RAW Port Number 1-6, Host Name, Domain Name, DNS Server, LPD.-[Apply] button:Click the button to apply the new settings.-[Clear] button:Click the button to clear the settings that were entered.IP FilteringThis screen appears when you click [IP Filtering] under the [TCP/IP] menu.The screen is used to specify the host address and restrict access permis-sion. You can also use the screen to enable or disable access permission,access refusal, and their ranges of TCP/IP filtering. When the same range isspecified for the accept setting and the refuse setting, the refuse setting haspriority over the accept setting.