Applications 8VarioPrint 1105 8-59The incompatible function keys will be dimmed to show inactivity.!DetailsNo Image Area Erase will be selected automatically. When using ADF toscan the original, touch to deselect this function.When using the Book Copy with this function, the original smaller thanthe selected paper size will be printed in the centre of the copy paperwithout image division performed.3 Touch [OK] on the Application popup menu.The Copy Screen will be restored.4 Select the desired magnification and paper size on the Copy Screen.!DetailsAPS and AMS are automatically released, and 1.000 (100%) is selectedas a magnification ratio.Copy mode is automatically set to 1-1. When selecting 1-2 mode, Mem-ory Scan mode will function automatically.5 Enter the desired print quantity from the control panel keypad.6 Position original(s) FACE UP in the document feeder or FACE DOWNon the original glass.2 ReminderDO NOT close the ADF when No Image Area Erase is selected.Placing original obliquely on the original glass may cause black copymarks.7 Press [Start].!DetailsHaving Any Problem?The Image Centering function may not operate properly if the lighting inthe work place is directly over the original glass. In this case, consult yourservice representative about an appropriate place for installation.