Utility Screen Settings 15VarioPrint 1105 15-902 Each Function SettingAuto select of Booklet copySet the machine to automatically select the Bookletmode when Stapling & Folding or Folding mode is se-lected.Auto Select/Not Auto SelectOriginal Glass AMSSet the machine to detect the size of the original andselect the appropriate magnification ratio to corre-spond to the selected paper size.On/OffADF AMSSet the machine to automatically select an appropri-ate ratio for copying when detecting the original sizeplaced on the ADF.On/OffOrig. Glass Auto Size SelectSet the machine to automatically select the same sizeof copy paper as the original placed on the originalglass.On/OffADF Auto Size SelectSet the machine to automatically select the same sizeof copy paper as the original placed on the ADF.On/OffSelect Tray when APS CancelSelect the tray to be automatically selected when APSis released.APS Select Tray/Tray1/Tray2/Tray3/Tray4/Tray5Org./Out Bind Direction SetSet the machine to conform the binding direction ofthe originals and printed sets each other.On/OffStapling Auto ResetSet the stapling setting on or off when pressing [Re-set].On/OffOriginal Binding DirectionSelect to reset or save the original direction settingmade on the Special Original Screen and the bind po-sition setting made on the Output Mode Screen aftercompletion of each copying job.Not Release/Release Per JOBStatus Hold When Auto ResetWhen Auto Reset functions, select to reset the Platen/RADF mode to the initial setting, or save the previoussetting.Hold/Not hold03 Copy Setting Setting options(default is highlighted)
